A335 Steel Strap Combination Tool
€10.00 The FROMM A335 Steel Strap Combination Tool is a reliable manual solution for regular-duty steel strapping applications. Robust, simple, and cost-effective, it is well suited for low-volume strapping tasks or as a dependable back-up tool.
This tool operates without the need for a power source or additional equipment, allowing it to be used anywhere, at any time. It provides consistent performance for users who require a straightforward manual strapping solution that is always ready when needed.
Whether used as a primary manual tool or kept on hand as a back-up, the FROMM Steel Strap Combination Tool offers dependable operation and long service life.
Features
- High tensile steel strap compatibility
- Two-lever operation for tensioning, crimping, and cutting
- Ergonomic design
Benefits
- No seals required
- Lightweight and easy to handle
- Robust and reliable construction
- Long-life wear parts
- FROMM 6-month warranty
Technical Specifications
Strap Width: 16 – 19 mm Strap Thickness: 0.50 – 0.58 mm Sealing Type: Sealless Weight: 3.9 kg
A333 Steel Strap Combination Tool
€10.00 The FROMM A333 Steel Strap Combination Tool is a reliable manual solution for regular-duty steel strapping applications. Robust, simple, and cost-effective, it is well suited for low-volume strapping tasks or as a dependable back-up tool.
This tool operates without the need for a power source or additional equipment, allowing it to be used anywhere, at any time. It provides consistent performance for users who require a straightforward manual strapping solution that is always ready when needed.
Whether used as a primary manual tool or kept on hand as a back-up, the FROMM Steel Strap Combination Tool offers dependable operation and long service life.
Features
- Standard duty steel strap compatibility
- Two-lever operation for tensioning, crimping, and cutting
- Ergonomic design
Benefits
- No seals required
- Lightweight and easy to handle
- Robust and reliable construction
- Long-life wear parts
- FROMM 6-month warranty
Technical Specifications
Strap Width: 12 – 19 mm Strap Thickness: 0.38 – 0.58 mm Sealing Type: Sealless Weight: 3.9 kg
Side Action Single Notch Sealer – 19mm
€10.00- Seals 19mm wide steel strap
- Single-notch sealing action for easier post-seal release
- Side action reduces operator strain
- Use with Safeguard LAP19-SG lap-over seals
- Weight 3.8kg
Side Action Single Notch Sealer – 32mm
€10.00- Seals 32mm wide steel strap
- Single-notch sealing action for easier post-seal release
- Side action reduces operator strain
- Use with Safeguard LAP32-SG-500 lap-over seals
- Weight 3.8kg
Side Action Single Notch Sealer – 25mm
€10.00- Seals 25mm wide steel strap
- Single-notch sealing action for easier post-seal release
- Side action reduces operator strain
- Use with Safeguard LAP25-SG lap-over seals
- Weight 3.8kg
Heavy Duty 40mm Tensioner
€10.00- For composite and woven cord polyester strapping
- Maximum strap width 40mm
- Extended handle for higher tensioning
- Weight 2.9kg
Extra Heavy Duty 40mm Tensioner
€10.00- Maximum strap width 40mm
- Vertical gripper mechanism for easier strap release and improved grip
- Weight 2.4kg
Heavy Duty 19mm PP Tensioner
€10.00- Maximum strap width 19mm
- Good for high strap tension
- Six-point windlass for easy strap loading
- Brass bushings for extended tool life
- Weight 2.2kg
Heavy Duty 25mm Tensioner
€10.00- Maximum strap width 25mm
- Use with galvanised or sherardised metal buckles
- Weight 2.3kg
Heavy Duty 19mm PET/PP Tensioner
€10.00- Maximum strap width 19mm
- Vertical gripper mechanism for easier strap release and improved grip
- 'home position' windlass return mechanism for faster and easier strap loading
- Weight 2.0kg
Heavy Duty 42mm Tensioner
€10.00- Maximum strap width 42mm
- Advanced patented design for use in heavy duty applications
- Weight 3.6kg
Extra Heavy Duty 32mm Tensioner
€10.00- Maximum strap width 32mm
- Vertical gripper mechanism for easier strap release and improved grip
- Weight 3.6kg
Compact 16mm Tensioner
€10.00- Maximum strap width 16mm
- High performance to size ratio
- Weight 1.4kg
Heavy Duty 19mm Woven Cord Tensioner
€10.00- Maximum strap width 19mm
- Vertical gripper mechanism for easier strap release and improved grip
- 'home position' windlass return mechanism for faster and easier strap loading
- Weight 3.3kg
Hotmelt Strap Tensioner
€10.00- Lightweight and simple to use
- Integral strap cutting blade
- Weight 0.04kg
Steel Strap Safety Cutter
€10.00- Cuts steel strapping up to 0.9mm thick and 32mm wide
- Rubber pads either side of blade gently release strap ends after cutting
- Weight 1.0kg
Heavy Duty Steel Strap Safety Cutter
€10.00- Cuts steel strapping up to 1.2mm thick and 32mm wide
- Rubber pads either side of blade gently release strap ends after cutting
- Low profile lower jaw for easy insertion under strap
- Weight 2.1kg
Extra Heavy Duty Cutter
€10.00- Cuts steel strapping up to 1.3mm thick and 50mm wide
- Weight 3.2kg
Extended Arm Steel Strap Cutter
€10.00- Cuts steel strapping up to 0.9mm thick and 32mm wide
- Extended arms for optimum cutting power
- PVC handle grips
- Weight 0.8kg
Heavy Duty 12mm Double Notch Sealer
€10.00- Ideal for heavy usage
- Seals 13mm wide steel strap
- Use with Safeguard SOS13-SG semi-open seals
- Weight 1.2kg
Single Notch Sealer – 19mm
€10.00- Seals 19mm wide steel strap
- Single-notch sealing action for easier post-seal release
- Use with Safeguard LAP19-SG lap-over seals
- Weight 1.1kg
Standard 13mm Single Notch Sealer
€10.00- Seals 13mm wide steel strap
- Single-notch sealing action for easier post-seal release
- Use with Safeguard SOS13-SG snap-on seals
- Weight 1.0kg
Side Action Double Notch Sealer – 25mm
€10.00- Ideal for heavy usage
- Seals 25mm wide steel strap
- Double notch sealing action for enhanced seal grip
- Side action reduces operator strain
- Use with Safeguard LAP25-SG lap-over seals
- Weight 3.8kg
Side Action Double Notch Sealer – 32mm
€10.00- Ideal for heavy usage
- Seals 32mm wide steel strap
- Double notch sealing action for enhanced seal grip
- Side action reduces operator strain
- Use with Safeguard LAP32-SG-500 lap-over seals
- Weight 3.8kg
Single Notch Sealer – 13mm
€10.00- Seals 13mm wide steel strap
- Single-notch sealing action for easier post-seal release
- Use with Safeguard LAP13-SG lap-over seals
- Weight 1.1kg
Single Notch Sealer – 16mm
€10.00- Seals 16mm wide steel strap
- Single-notch sealing action for easier post-seal release
- Use with Safeguard LAP16-SG lap-over seals
- Weight 1.1kg
Side Action Double Notch Sealer – 19mm
€10.00- Seals 19mm wide steel strap
- Double notch sealing action for enhanced seal grip
- Side action reduces operator strain
- Use with Safeguard LAP19-SG lap-over seals
- Weight 3.8kg
Standard 16mm Single Notch Sealer
€10.00- Seals 16mm wide steel strap
- Single-notch sealing action for easier post-seal release
- Use with Safeguard SOS16-SG snap-on seals
- Weight 1.0kg
Heavy Duty 16mm Double Notch Sealer
€10.00- Ideal for heavy usage
- Seals 16mm wide steel strap
- Use with Safeguard SOS16-SG semi-open seals
- Weight 1.2kg
Standard 19mm Single Notch Sealer
€10.00- Seals 19mm wide steel strap
- Single-notch sealing action for easier post-seal release
- Use with Safeguard SOS19-SG snap-on seals
- Weight 1.0kg
Heavy Duty 19mm Double Notch Sealer
€10.00- Ideal for heavy usage
- Seals 19mm wide steel strap
- Use with Safeguard SOS19-SG semi-open seals
- Weight 1.2kg
Offset Jaw Sealer – 16mm
€10.00- Maximum strap width 16mm
- Offset jaws for enhanced seal efficiency
- Use with Safeguard SER16-SG serrated seals
- Weight 2.2kg
Offset Jaw Sealer – 12mm
€10.00- Maximum strap width 12mm
- Offset jaws for enhanced seal efficiency
- Use with Safeguard SER12-SG serrated seals
- Weight 2.2kg
Heavy Duty 16mm Offset Jaw Sealer
€10.00- Maximum strap width 16mm
- Offset jaws for enhanced seal efficiency
- Use with Safeguard SER16-SG serrated seals
- Weight 2.3kg
Heavy Duty 12mm Offset Jaw Sealer
€10.00- Maximum strap width 12mm
- Offset jaws for enhanced seal efficiency
- Use with Safeguard SER12-SG serrated seals
- Weight 2.3kg
Heavy Duty 19mm Sealer
€10.00- Maximum strap width 12mm
- Jaw configuration automatically aligns with seal
- Use with Safeguard SER19-SG serrated seals
- Weight 3.8kg
Heavy Duty 16mm Symmetrical Jaw Sealer
€10.00- Maximum strap width 16mm
- Jaw configuration automatically aligns with seal
- Use with Safeguard SER16-SG serrated seals
- Weight 2.1kg
Heavy Duty 12mm Symmetrical Jaw Sealer
€10.00- Maximum strap width 12mm
- Jaw configuration automatically aligns with seal
- Use with Safeguard SER12-SG serrated seals
- Weight 2.1kg
Heavy Duty 16mm Sealer
€10.00- Maximum strap width 16mm
- High seal efficiency
- Use with Safeguard SO16-SG or SO1632-SG seals
- Weight 2.2kg
Budget 12mm Offset Jaw Sealer
€10.00- Maximum strap width 12mm
- Offset jaws for enhanced seal efficiency
- Use with Safeguard SER12-SG serrated seals
- Weight 2.0kg
Heavy Duty 12mm Sealer
€10.00- Maximum strap width 12mm
- High seal efficiency
- Use with Safeguard SO34-SG/SO1232-SG or SC12 seals
- Weight 2.2kg
Standard 12mm Sealer
€10.00- Maximum strap width 12mm
- Single notch action releases highly tensioned strap more easily
- Use with Safeguard SO34-G/SO1232-SG or SC12 seals
- Weight 1.8kg
Standard 16mm Sealer
€10.00- Maximum strap width 16mm
- Single notch action releases highly tensioned strap more easily
- Use with Safeguard SO16-SG or SO1632-SG seals
- Weight 2.0kg
Stainless Steel Tensioner
€10.00- Use with SBK knock down buckles
- Suitable for 12-19mm wide strap
- Weight 1.9kg