Pallet Wrap &
Wrapping Products

Hand pallet wrap is designed to be applied manually by an operator walking around the pallet. It is typically wound onto a core that can be held by hand or used with a hand wrap dispenser. Machine pallet wrap is designed for use with turntable or robotic pallet wrapping machines – it is supplied in larger roll lengths, often with a narrower core diameter, and is engineered to work with the machine’s film carriage and pre-stretch system. Using hand wrap on a machine or vice versa can result in poor performance or film breakage – contact our team to confirm the correct film for your machine.

Gauge refers to the thickness of the stretch film, typically measured in microns. Lighter gauges (10-15 micron) suit lighter loads and general purpose wrapping. Standard gauges (17-23 micron) are the most widely used for everyday pallet wrapping across a range of load weights. Heavier gauges (25 micron and above) are used for heavier, more irregular, or sharper-edged loads where puncture resistance is more important. Higher-performance pre-stretch films can achieve the same load containment at a lower micron by stretching further before application. Our team can advise on the right specification for your load type.

Breathable pallet wrap – also called perforated stretch film – has small holes punched through the film that allow air to circulate through the wrapped pallet. It is used for fresh produce, flowers, plants, and other perishable or temperature-sensitive goods that need to breathe during storage or transit. It still provides the load containment and stability benefits of standard stretch film, but without trapping heat and moisture inside the wrap that could cause condensation or spoilage.

Pre-stretch pallet wrap has already been stretched during manufacturing – typically by 70-150% – before being wound onto the roll. Because the film is already elongated, each roll covers a greater surface area than standard film of the same weight, meaning fewer rolls are used per pallet. Pre-stretch film also applies with less physical effort since the operator or machine doesn’t need to stretch the film as much during wrapping. It is particularly cost-effective for high-volume machine wrapping operations.

A dispenser is not strictly required for hand pallet wrap, but it significantly improves efficiency and consistency. A hand wrap dispenser holds the roll and applies controlled tension as the film is applied, resulting in a more consistent wrap, less film waste, and reduced operator fatigue. Extended core rolls are designed specifically for use with dispensers. For operations wrapping more than a few pallets per day, a dispenser is a worthwhile addition to the packing area.

Spiral wrap is a stretch film used with horizontal orbital wrapping machines to wrap and secure long products such as pipes, timber, and profiles. Using a spiral wrapping technique, the film provides even coverage and consistent tension across the full length of the product, securing the load and protecting it during storage and transit. It is available in a range of gauges including standard and nano films, and in a choice of core sizes to suit different orbital wrapping machines. Both automatic and semi-automatic machines are supported.

Yes – Ventamac offers trade accounts with credit facilities for qualifying businesses. Trade account customers benefit from volume pricing, dedicated account management and streamlined repeat ordering. Contact us to apply.